Double Glazing Window Locks Repairs
Repairing double glazing window locks is crucial to keeping your home safe. Insecure handles or hinges could let draughts in to your home and leave your windows vulnerable to burglars.
You can, however, repair rigid uPVC locks or handles without replacing your door or window. Sometimes, cooling or lubricating the mechanisms can resolve any issues.
Broken Glass
Over time, double glazing window locks can wear out. When this happens, the handles could become difficult to open or even close. This can lead to problems with ventilation and also could pose a security risk. It's important that you get the window fixed as soon as possible.
double glazing repair near me glazed windows are made up of three or more glass panes that have gas between them to provide insulation as well as an elastomer seal that holds the panes together. Having condensation in between the glass panes is usually a sign that there is an issue with one of these seals, which needs to be replaced. This will typically involve replacing only one pane of the window and is much cheaper than replacing the entire window.
A blown seal in a double glazed window usually results in cloudiness and condensation. This can be caused by many reasons, such as air leaks or an excess amount of humidity in the home. As soon as you notice the problem, it's important to contact a double glazing expert to replace the gas seal and seal on your double-glazed windows.
It is possible to replace one pane of double glazing glass however, it is not advised to do it without the assistance of a professional. This is due to the fact that it requires specialized tools and expertise to do the job safely. You could end up damaging the window frame or even your health if trying to do it yourself.
If a double-glazed window gets stuck, a lot of people use a crowbar in an attempt to open it. However, this usually causes the frame to be damaged and swollen. A window specialist will be able to take off the handle and open your window without causing any further damage. They can also change the old window mechanisms into modern ones.
As time passes, window hinges can become stiffer and more difficult to open, particularly in areas that are noisy. To prevent this from happening it's recommended to lubricate the hinges regularly with silicone spray. It's also important to avoid shutting the window heavy or closing it with the handles since this could harm the hinges as well as the lock mechanism.
Broken Sash
This is a typical issue for older double-glazed windows. It can be difficult to lock and open a windows if the upper sash is out of its pocket. This usually happens because the pins are not engaged or a balance shoe has been disconnected. It is important to know how your sash is installed before attempting to fix it.
The best way to solve this is to remove the sash, and then clean it thoroughly. This will also reveal whether it's still a great fit. If not, you'll need to add sash stops to help keep it in place. You can purchase them from most hardware stores or online. Once you've cleaned the sash you can put in the beads that are parting, and apply lubrication to the pulley axles with a Teflon or silicone spray. It's a good idea to label the weights prior to you take them off to ensure that you return them correctly.
A damaged handle is another common issue. It's difficult to tell if your windows handle is broken however there are some indications. If the handle is spongy or stiff, or if it doesn't feel solid, it's likely broken.
It could be due to lack of use or the handle could be cracked or detached. In certain cases, the handle might be damaged inside and cannot be repaired however it's worth attempting to fix it immediately you notice the issue.
To take the window sash off you might need to take off hinges that attach it to the frame. This can be a tricky task, so it's essential to have someone to hold the sash and keep it in place. After removing the hinges, it's necessary to clean them as well as the areas around them. Reattaching the hinges is a good idea. You can test the handle and verify if it is working correctly. If it's not, you may want to consider replacing it. This will ensure that your window is as safe as it can be.
Broken Handle
It is not unusual for a window handle to break or weaken over time. As such, it's essential that any broken handles are repaired as soon as possible to avoid a inability to function and security issues.
Fortunately, it is easy to change windows handles. Unlike a sash, which requires multiple bolts to secure, a window handle is secured using two screws which makes it a straightforward DIY project for anyone with a bit of experience. After the new handle is in place, it's crucial to test it to make sure the mechanisms are functioning correctly. This should include locking the handle and checking for gaps that could allow drafts in or potential thieves to gain access to your home.
A common reason for a window handle that is broken is that it's damaged from use over and over again. A broken handle can be caused by excessive force or stress. The force of a window or hammering it open can place additional strain on the handle, which can increase the chance of damage, therefore it's always best to carry out any handling tasks slow and slowly.
Other reasons for a damaged handle are poor maintenance, ageing or design issues. A lack of regular cleaning and lubrication can cause the handle to break down early, which is often the result of dirt or debris that builds up over time. The handle could be damaged due to improper installation or issues with alignment.
If the solutions mentioned above don't work If these solutions don't work, the Tasker will need to gain access to the lock and take it off itself. This may involve removal of the window frame, or removing the plastic bead and frame (to give more space). The replacement lock can then be installed to match the shape of the uPVC handle. After this is completed the new handle will be re-affixed and the process is complete. Tasker will give you a quote on the cost of repair if this is the situation.
Faulty Lock
When window locks get damaged, it's crucial to fix the issue immediately. A damaged window can lead to draughts, weaken security barriers and expose your home to burglary. Window lock repairs are generally minor, but it is better to call a professional before the problem becomes more severe and costs you more money.
UPVC window handles come in two styles that include cockspur handles and espagnolette handles. The first uses a central rod that operates the locking cams, which are shaped like mushrooms, that secure into window frame keepers. The lock's mushroom cams are activated by a handle connected to the spindle. The latch of the lock snaps into the mortise catches on a window frame.
Both kinds of UPVC windows locks are susceptible to damage, especially in older homes. This can happen when the sash becomes warped or misaligned, and it could even break loose. In these situations the lock must be replaced to avoid the possibility of draughts and decrease in energy efficiency. Tasker can repair the damaged lock for you, leaving you with the assurance that your windows are safe from intruders.
A Tasker will examine your double glazing window and determine the issue. Once they have the required information, they'll make their tools prior to arriving at your home. They'll typically bring a Phillips head screwdriver and needle nose pliers, wood glue and fine-grit paper.
If the sash is not aligned properly the Tasker needs to loosen the screws holding each piece of the lock to the window frame. The Tasker will then remove the latch and then fill the mounting holes (if necessary) with wood putty, before sanding the area to ensure it is flush with the rest.
If the lock is rusted, they'll clean it using a wire brush or oil and lubricate it with grease to ensure it's functioning smoothly. They'll also make sure that the latch is in good condition and replace it.